Model No.: IV 0.76, IV0.80, IV0.84
Hot Fill Bottle Grade PET Chips Pet Resin
PET (Polyethylene Terephthalate) Resin is cream or pale-yellow crystal, with smooth and shiny surface. Resistance to creep deformation, fatigue resistance, abrasion resistance and dimensional stability are perfect. Small wear and tear but high hardness, its toughness is the largest in thermoplastic. The electrical insulation of PET is perfect and little be affected by temperature, however, poor corona resistance. PET is non-toxic, weather resistance, and anti-chemical stability is very good. PET is low water absorption, resistance to weak acids and organic solvents. Intolerance of hot water immersion and alkali.
Specification
Item | Index |
Intrinsic viscosity (IV) dl/g | 0.80+/-0.002 |
Crystallinity % | ≤60 |
Acetaldehyd Content ppm | ≤1.0 |
Color (L-value) | ≥83 |
Color (b-value) | ≤1 |
Melting point °C | 243 ± 2 |
Moisture Content %/w | ≤0.4 |
Weight of 100 chips g | 1.55 ± 0.10 |
Dust content ppm | ≤100 |
Application
1. It is widely used in packaging, electronics, health care, construction, automotive and other fields.
2.It is used in synthetic fibers, and engineering resins often in combination with glass fiber.
3.Beverage, food and other liquid containers.
Packing:
25kg/bag,1100kg/jumbo bag or per your requirement.
22mt/20'FCL
Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
Other Products : Pvc Resin, PVC Paste Resin, DOP, DOTP, Titanium Dioxide, Iron Oxide, SLES
Subscribe To Our Newsletter:
Get Updates, Discounts, Special
Offers and Big Prizes!